Rough Idle ...
Rough Idle ...
Just goofing around today ... Almost time to get the bike ready for winter so I did a lttle maint. After all this time I still love the way the engine runs and it's just getting broke in.
I had to turn the "steady shot" off on the camera because it sounded awesome but took all the shake out of the video! I knew it shook but did not realize how mch until I saw the video! I LOVE it ...
PS
Tried to do the embedding thing from You Tube but it's beyond me, I couldn't figure it out!
I had to turn the "steady shot" off on the camera because it sounded awesome but took all the shake out of the video! I knew it shook but did not realize how mch until I saw the video! I LOVE it ...
PS
Tried to do the embedding thing from You Tube but it's beyond me, I couldn't figure it out!
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: Rough Idle ...
Haha...thanks for posting! we love the way it idles too Vman.
I like your drag bars too - can i ask where you got them and what model are they?
Thas,
AR.
I like your drag bars too - can i ask where you got them and what model are they?
Thas,
AR.
Re: Rough Idle ...
Thanks - The bars are made by a company Wild 1 and they're Chubby Bars. I've had them on the bike for about five years now, I'll look and see if I can get you a model number. I like the way they look on the bike BUT the stock beach bars probably make the bike handle easier (slow speed situations) just because the "leverage" thing.Aussiefahrt wrote:Haha...thanks for posting! we love the way it idles too Vman.
I like your drag bars too - can i ask where you got them and what model are they?
Thas,
AR.
PS
Thanks to whoever fixed the You Tube link for me!
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: Rough Idle ...
Your bike almost sounds like my 502. I would have posted a clip of mine idling on your thread... to show just how similar they sound. But maybe that's rude to do that.
Re: Rough Idle ...
by my ear the stroker sounds more 'race ready' if that makes sense. Can idle at higher rpms without loosing the lope. Totally different attitude from a 502. Fuck i just want 1 of each!
Re: Rough Idle ...
Ric wrote:Your bike almost sounds like my 502. I would have posted a clip of mine idling on your thread... to show just how similar they sound. But maybe that's rude to do that.
Ric -
NOT rude at all ... post your video dude! I've ridden with lot of BB and they sound a little similiar. I think a well built SB is a big surprise to many people ... LOTS and LOTS of attitude ... people expect the attitude with a BB.
Don
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: Rough Idle ...
W1LDMAN wrote:On the youtube posts we are working on completing the work on the site to make it easy to post the videos yourself. If you post a youtube link I will edit it so it plays in your post until then.
You must have fixed mine THANKS!
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: Rough Idle ...
Coming at you Canadain style
Re: Rough Idle ...
That last vid was inside my shop.... this next one is outside.
Re: Rough Idle ...
Great videos Ric, the first video when you turned the ignition on ... was that the fuel or water pump I heard? Whichever it was it's LOUD, much louder then ussual. You may want to check it out, I'd hate to see either one take a crap with you on the road someplace ...
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: Rough Idle ...
Sorry Aussie, I have looked and can't seem to find paperwork on the handlebars for the model number. If you like I can get you all the measurements?Aussiefahrt wrote:Haha...thanks for posting! we love the way it idles too Vman.
I like your drag bars too - can i ask where you got them and what model are they?
Thas,
AR.
V
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: Rough Idle ...
V-MAN wrote:Great videos Ric, the first video when you turned the ignition on ... was that the fuel or water pump I heard? Whichever it was it's LOUD, much louder then ussual. You may want to check it out, I'd hate to see either one take a crap with you on the road someplace ...
Nah... not to worry V... The camera is 'amplifying' that sound of the fuel pump. It sounds like most any other Boss Hoss pump so far. The camera was only inches away from the fuel pump when I leaned down to turn on the fuel valve.
But I AM going to add a new fuel pump to my spare parts for bike trips.
You likely heard the squeal of the serpentine belt too when I revved the motor. I'm replacing that this winter, having the bearings swapped out in the Alternator, and keep the old belt as a spare.
Re: Rough Idle ...
Gotch ya, that's cool. I only said something because my fuel pump did take a dump on me in Daytona (no warning at all) and it wasn't fun pushing my bike North on A1A to reach a side street! Then I had to catch a ride to auto store ... lucky I found a pump I could use at the second store I went to. I'm sure where you live the push would be much furthur then I had! Always good to have a spare ...Ric wrote:V-MAN wrote:Great videos Ric, the first video when you turned the ignition on ... was that the fuel or water pump I heard? Whichever it was it's LOUD, much louder then ussual. You may want to check it out, I'd hate to see either one take a crap with you on the road someplace ...
Nah... not to worry V... The camera is 'amplifying' that sound of the fuel pump. It sounds like most any other Boss Hoss pump so far. The camera was only inches away from the fuel pump when I leaned down to turn on the fuel valve.
But I AM going to add a new fuel pump to my spare parts for bike trips.
You likely heard the squeal of the serpentine belt too when I revved the motor. I'm replacing that this winter, having the bearings swapped out in the Alternator, and keep the old belt as a spare.
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
Re: Rough Idle ...
Don , those bars look like they could be Flanders bars ? I had a set of Flanders bars that looked very similar to those .V-MAN wrote:Sorry Aussie, I have looked and can't seem to find paperwork on the handlebars for the model number. If you like I can get you all the measurements?Aussiefahrt wrote:Haha...thanks for posting! we love the way it idles too Vman.
I like your drag bars too - can i ask where you got them and what model are they?
Thas,
AR.
V
Jack
Last edited by hogv8 on Tue Dec 15, 2009 7:53 am, edited 1 time in total.
Re: Rough Idle ...
Measurements would be cool Don...i'd rather get them locally now that Christmas is almost here and my money is history, amongst other lemon scented unforseen billshogv8 wrote:Don , those bars look like they could be Flanders bars ? I had a set of Flanders bars that look very similar to those .V-MAN wrote:Sorry Aussie, I have looked and can't seem to find paperwork on the handlebars for the model number. If you like I can get you all the measurements?Aussiefahrt wrote:Haha...thanks for posting! we love the way it idles too Vman.
I like your drag bars too - can i ask where you got them and what model are they?
Thas,
AR.
V
Jack
Thanks,
Rob.
Re: Rough Idle ...
Cool videos listening to the two different motors. Both sound very snotty. Am I allowed to use that word?
E
E
...Todd, North Carolina