Raked triple trees (14 degrees over stock)
Air Ride Shocks with on board compressor (shocks have both ride AND height adjustments)
Chrome Frame (front half only, rear half is covered and cannot be seen)
Paint Job by Mike Dusold of Dusold Designs in Lewisville, Texas (http://www.dusolddesigns.com/ )
Chrome clock and Thermometer with Chrome mounts
Chrome engine guards
chrome highway pegs with extensions
Chrome custom handlebar Risers that match the trees
Chrome bullet front turn signals with custom mounts
GPS with custom built chrome custom mount
Windvest Windshield and mounts
Chrome spark plug wiring looms
Chrome frame plate covers at swing arm connection
Completely customized water cooling system, Temp never exceeds 195 degrees.
A) New radiator and I had some welding performed to allow larger diameter feed to the water pump.
B) New brass fitting that I had machined to allow larger flow volume through the water pump.
C) I took the old water intake manifold apart and rebuilt it to allow larger water flow volume to the engine.
New harmonic engine balancer for new serpentine belt system including new chrome alternator with serpentine pulley
complete wiring upgrade with new fuse block
upgraded greasable swing arm bolts and altered assembly to allow the bushings to work properly
New carburetor that was blueprinted by Shafiroff Racing engines
LED clusters for rear tail light assembly
custom bent and mounted steel transmission lines from the tranny to the cooler and back
Upgraded headlight.
Chrome nut and bolt cover set.
upgraded fuel pump with additional wiring for a quick connection for backup pump (back up pump included)
Chrome dash inserts
Drivers back rest with passenger seat
passenger backrest with luggage rack
lower air dam with driving lights
custom gas tank caps
chrome swing arm caps (rear)
chrome rear wheel hub assembly and nuts
upgraded chrome slider assembly for driver footpegs
cut hole and install grommets through frame neck and re-ran all handlebar and light wiring in chrome flexable tubing through the frame neck (much cleaner look)
Custom chrome radiator fan shroud. This is a full 3 step chrome job that will never peal like the stock unit.
