I just installed a new TCI torque converter and of course after reassembling the bike the torque converter seal was leaking. I split the bike again and pulled the trans pump off and pressed in a new seal (also replacing both O-rings in and on the pump). I'm ready to bolt the pump back on but don't know how tight the 4 5/16 bolts should be? Anyone have the torque specs or can point me in the right direction to find them?
Thanks,
George
NEED TORQUE NUMBERS FOR TRANS PUMP 05 SMALL BLOCK
Re: NEED TORQUE NUMBERS FOR TRANS PUMP 05 SMALL BLOCK
George -
I am sure you already having your bike back together ... if not here is a chart showing general guidelines. Looks like 10-29 ftlb depending on grade of bolt.
![Image](http://constructionmisc.tpub.com/TM-5-3710-200-13P/img/TM-5-3710-200-13P_22_1.jpg)
I am sure you already having your bike back together ... if not here is a chart showing general guidelines. Looks like 10-29 ftlb depending on grade of bolt.
![Image](http://constructionmisc.tpub.com/TM-5-3710-200-13P/img/TM-5-3710-200-13P_22_1.jpg)
IF YOU TELL THE TRUTH YOU DON'T HAVE TO REMEMBER ANYTHING
![Image](http://v-man.org/gallery3/var/albums/avatar2.jpg?m=1459357789)
![Image](http://v-man.org/gallery3/var/albums/avatar2.jpg?m=1459357789)